Skip to main content

Prevention

The Prevention tab provides a performance overview of all installations, helping operations teams detect underperformance before it becomes a critical issue.

It helps to:

  • Identify installations with low performance that may require attention.
  • Compare estimated vs. actual production over a rolling 30-day window.
  • Track performance trends through variation indicators.

How performance is calculated​

Performance shows how much energy an installation is producing compared with how much it should be producing. It is calculated over a rolling 30-day period:

Performance (%) = Actual production / Estimated production x 100

  • Actual production is the energy the installation has really produced, as reported by the inverter.
  • Estimated production is the energy the installation is expected to produce on a normal day, given its size and its location.

How the estimated production is obtained​

The estimate is based on PVGIS, the European Commission's solar tool, which uses several years of historical weather data. For each installation, Clevergy uses:

  • The installed capacity (kWp).
  • The location of the installation.
  • The tilt, orientation and system losses. Unless configured otherwise, standard values are used: 30 degrees tilt, facing south and 14% losses.

An installation can also be configured with several arrays, for example a roof with sections facing different directions. Each array has its own orientation, tilt and system losses, so the estimate reflects how the panels are really laid out.

With this, Clevergy obtains the average production expected for every day of the year. This value is calculated once and updated only if the installation data changes (for example, its capacity or its address).

How to use the prevention tab​

  • Review the list regularly, ideally on a weekly basis.
  • Start with installations in the less than 70% category, as they are the most likely to have an actionable issue.
  • Compare estimated vs. actual production to understand the magnitude of the underperformance.
  • Check the variation column to identify whether performance is declining, stable, or recovering.
  • Use the plant code to cross-reference the installation in the manufacturer's monitoring platform for further diagnostics.
  • For newly installed systems, consider that a short production history may result in less reliable performance values.